Komax Kappa 330 Automatic Stripper
Power, performance and new type of sensors are the three key features of the Kappa 330. Simple operation allows these automatic cutting and stripping machines to be used efficiently and, coupled with their ultra-flexibility, enables them to handle even the most difficult tasks.
Key features:
- High performance
- Simple, flexible operation with touch interface
- Innovative sensors to aid in setup and to monitor processing
- Minimal wire loss thanks to sensor monitoring
- Simple integration of delivery and deposit equipment
- TopWin interface
- Networking in company network
This model is designed for processing cables with a cross section of up to 35mm2, multi-core conductors with an outside diameter of up to 16mm or flat cables with a width of up to 40mm. The customer has his choice of a belt drive or various double-roller drives depending on his requirements.
Area of application
The Kappa 330 belongs to the latest generation of automatic cutting and stripping machines. This model is compelling in the extremely broad range of processing they cover. With the simple, flexible touch controls, even difficult to process materials can be set up quickly and easily. The conversion to new types of cables can be done without tools so it is ultra-fast.
Sensors
The conductor diameter is automatically detected by a sensor using an inductive measuring approach. This feature greatly shortens setup and changeover and reduces operating errors. Laser and a CCD line optically measure the outside cable diameter and check that the cable is present during processing.
Flexible and user friendly
The intuitive TopTouch Kappa user software is modeled on the TopWin structure found in automatic crimping machines. With the integrated user wizards, Kappas are extremely easy to operate. In addition, they can be controlled and networked using TopWin, WPCS and TopConvert.
Periphery and interfaces
The integration of wire feeding systems, printers, active deposition units, etc. is standardized and easy. Special attention was paid to the integration and control of inkjet systems. Data backup and updates are handled over a USB port.
Additional Images
No Additional Images
Technical Data
- Cable cross section, stranded wires*
- 0.22–35mm2
- AWG24–AWG2
- Maximum outside diameter :16mm (0.63in.)
- Cable length range : 1mm–700000mm (0.039in.–765.53yd.)
- Maximum wire transport speed : 4.0m/s (157.5in./s)
- Quantity range (pcs) : 1–99999
- Maximum stripping lengths
- Full strip
- Side 1: 180mm (7.09in.)
- Side 2: 50mm (1.97in.)
- Intermediate stripping
- Partial strip
- Side 1: 999.9mm (39.37in.)
- Side 2: 999.9mm (39.37in.)
- Intermediate stripping
- Quantity × max. length
- Programmable (no restrictions on quantity and length)
- Full strip
- Cable monitoring (Cable detector) : Standard
- Automatic cross-section detection (Conductor detector) : Standard (automatic detection of cut depth)
- Noise level :
- Drive system : Double roller drive or belt drive
- Production table : Optional
- Electrical connection : 110/230VAC ±10% 50/60Hz 520VA
- Pneumatic connection : 5–8bar (73–116psi)
- Dimensions (W×H×D) : 630×365×480mm (24.8×14.8×18.9in.)
- Weight : Approx. 55kg (157.4lb)
*The Kappa generations can process many conductors outside the indicated cross section range. Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.
More Info
Would you like more information, or to buy this product? Enter your details below and we will be back intouch with you as soon as possible.
