UniCrimp 500 B
Schleuniger Solutions UniCrimp 500 B
Crimping Machine
The UniCrimp 500 is a programmable crimping machine with 5 tons of press forces. It processes both rear and side feed banded terminals (open or closed barrel type) for cable cross sections up to 16 mm² (6 AWG).
- For processing large cable cross sections up to 16 mm² (6 AWG)
- For processing rear and side feed banded terminals
- Short cycle times
- Quick-change applicator base plate
- Optional crimp force monitoring
UniCrimp 1100 B
Schleuniger Solutions UniCrimp 1100 B
Crimping Machine
With 11 tons of crimping force, the UniCrimp 1100 B is a programmable benchtop crimping machine for cable cross sections up to 35 mm² (2 AWG). It processes both rear and side feed banded terminals (open or closed barrel type).
- For processing large cable cross sections up to 35 mm² (2 AWG)
- For processing rear and side feed banded terminals
- Short cycle times
- Quick-change applicator base plate
- Optional crimp force monitoring
UniCrimp 2500 B
Schleuniger Solutions UniCrimp 2500 B
Crimping Machine
The UniCrimp 2500 B is a semi-automatic benchtop crimping machine with 25 tons of press force. It is ideally suited for special applications such as hexagonal forming of metal tube terminal ends for cables with a cross section up to 50 mm² (0 AWG). With the adequate options, the UniCrimp 2500 B equally processes banded terminals.
- For processing large cable cross sections up to 50 mm² (0 AWG)
- Features 25 tons of press force
- For special applications (e.g. loose-piece terminals)
- Short cycle times
- Optional crimp force monitoring
UniCrimp LPC B
Schleuniger Solutions UniCrimp LPC B
The UniCrimp LPC B is a semi-automatic benchtop machine for processing turned loose piece terminals (closed barrel) with a cross section range from 0.14 – 4 mm² (AWG 26 – 12). A combined drum / track system feeds, sorts and separates the loose piece terminals and subsequently brings them into the correct crimping position. Modular change-over kits reduce machine downtime to a minimum and allow flexible processing of different terminal sizes and geometries (male / female).
- High precision & repeatability according to MIL spec 22520
- Short cycle times
- Change-over of terminal type in < 5 minutes
- Crimp depth step-less adjustable
- Different operating modes selectable (single step, full cycle, discharge)
SLU 3000
Schleuniger Solutions SLU 3000
Sealing Station for CrimpCenter Series
The SLU 3000 sealing station is perfectly suited for applying weather seals on wire ends with the fully automatic cut strip terminate machines of the CrimpCenter series. The compact unit with its proven technology is specifically designed for high-speed processing of almost all seal types.
- Compact design
- Processing of almost all seal types
- Fast change-overs without any tools
- Short cycle times
- Optional seal-check available
StripCrimp LPC Crimping Machine
Schleuniger Solutions StripCrimp LPC
The StripCrimp LPC is a semi-automatic benchtop machine for processing turned loose piece terminals (closed barrel) with a cross section range from 0.14 – 2.5 mm² (AWG 26 – 14). Key component is a highly flexible feeding module that first sorts and separates terminals with an integrated drum / track system and subsequently brings them into the correct crimping position.
- High precision & repeatability according to MIL spec 22520
- Change-over of terminal type in < 5 minutes
- Simple operation with PILOT handheld
- Programmable sequence: zero cut, strip, crimp
- Crimp depth step-less adjustable
Rennsteig CM25-6
Rennsteig CM25-6 Pneumatic Crimping Machine
The Rennsteig CM 25-6 Crimping machine is designed with a reduced stroke for working without protection. the Crimp die accommodation rotates through 360°. Fine adjustment of crimp height by adjustment nut at the press ram.
Rennsteig CM25-5 Loose Peice Crimping Press
Rennsteig CM25-5 Pneumatic Crimping Machine
The Rennsteig CM 25-5 Crimping machine is fitted with a sliding tray for most of the crimp dies and locators of the Crimp Tool System 12. Connector and cable are held in the open bottom section. Wire clamps in for safe working. Automatic release following insertion
GLW MC40 / MC40L
Automatic Stripper and Crimper MC 40 – MC40L
Stripping and crimping in one operation.
GLW MC 25
GLW MC25 Automatic Stripper Crimper
The extremely handy Automatic Stripper and Crimper MC 25 Insulation stripping and crimping in 1.5 seconds
GLW EC 65
GLW Electric Crimper EC 65
The EC 65 is compact and lightweight, yet rugged enough for the factory floor. It is well suited for complex cable harness assemblies.
The EC 65is an ideal device to securely crimp wires and cable terminals such as:
- Insulated cable lugs to 6 mm2 / 10 AWG
- Tubular cable lugs, solderless terminals to 10 mm2 / 8 AWG
- Flat tab terminals to 6 mm2 / 10 AWG
- Wire end sleeves to 50 mm2 / 1 AWG
